Skip to main content
Menu
View all guides

Wi-Fi Booster+

Installation Guide
Step 1

Before you begin

Make sure you have an Internet Box+ and check that the Wi-Fi indicator light is turned on.
My Wi-Fi Booster
Installation type
Select the type of configuration you wish to set up.

Required components for the installation


Step 2

Switch on the Wi-Fi Booster+

Connect the Wi-Fi Booster+ power cable to a power socket in the same room as the Internet Box+. Press the POWER button; the indicator light
turns orange or white.
  • Screw the bracket to the wall.
  • Then attach the Wi-Fi Booster to it.

Step 3

Synchronize the Internet Box+’s Wi-Fi with the Wi-Fi Booster+

On the Internet Box+, press the WPS button until the indicator light
flashes white.
On the Wi-Fi Booster+, press the WPS button until the indicator light
flashes white.
This may take up to 10 seconds.
Once synchronization is complete, the indicator light
turns green and the Indicator light
Solid blue. This may take a few minutes.
You can unplug your Wi-Fi Booster+ and place it in whichever room you like.

Step 4

Connect the Wi-Fi Booster+ to the Internet Box+

Use the Ethernet cable and connect one end to the yellow 10G LAN port on the back of the
Wi-Fi Booster+. Connect the other end of the cable to an Ethernet socket in your home. Make sure that this socket is properly connected to the Internet Box+.
You’re free to connect other devices to the other free yellow Ethernet port on the Wi-Fi Booster+: games consoles, Blu-ray players or computers...

Step 5

Switch the Wi-Fi Booster+ back on

Connect the Wi-Fi Booster+ power cable to the power socket.
Check that the POWER button is pressed down.
  • Blue: the Wi-Fi Booster+ is turned on.
  • Purple: the Wi-Fi Booster+ is starting up.
  • Blinking white: Connecting to the internal network. This may take a few minutes.
  • Flashing orange: the Wi-Fi Booster+ has started up but has not been configured.
  • Blue: the Wi-Fi Booster+ is working correctly.

  • Blinking white: a WPS pairing is in progress.

  • Red: The Wi-Fi on the Wi-Fi Booster+ is not working. Please restart the device.

  • Off: Wi-Fi is not configured.

  • Green: optimal signal.

  • Orange: acceptable signal.

  • Red: poor signal. You will need to move the device or use a second one to boost the signal.


Was this guide helpful?

Thank you for your feedback!

Do you have any suggestions for us? What did you like?

We are sorry to hear that!
Your feedback matters to us!

What are you looking for?

Your feedback has been sent to our teams.