Skip to main content
Menu
View all guides

Wi-Fi Booster v2

Installation Guide
Step 1

Before you begin

Make sure you have an Internet Box+ and simply check that the Wi-Fi indicator light is turned on.
My Wi-Fi Booster
My Internet Box
Select the type of Internet Box you wish to install.
Installation type
Select the type of configuration you wish to set up.

Required components for the installation


Step 2

Switch on the Wi-Fi Booster

Connect the Wi-Fi Booster’s power supply cable to a power socket in the same room as the Internet Box+. Press the POWER button; the indicator light will turn orange or white.

Step 3

Synchronize the Internet Box+’s Wi-Fi with the Wi-Fi Booster

On your Internet Box+, briefly press the WPS button. The Wi-Fi indicator light will turn white.
On the Wi-Fi Booster, press the WPS button until the Indicator light
flashes white. This may take up to 10 seconds.
Once synchronization is complete, the Indicator light
turns green.
You can unplug your Wi-Fi Booster and place it in whichever room you like.

Step 4

Connect the Wi-Fi Booster to the Internet Box+

Use the Ethernet cable and connect one end to one of the yellow Ethernet ports on the back of the Wi-Fi Booster+. Connect the other end of the cable to an Ethernet socket in your home.
Make sure that this socket is properly connected to the Internet Box+.
You are free to connect other devices to the Wi-Fi Booster’s other free yellow Ethernet port: a games console, a Blu-ray player or a computer.

Step 5

Switch the Wi-Fi Booster back on

Connect the Wi-Fi Booster’s power cable to the power socket.
Check that the POWER button is pressed down.
The Wi-Fi indicator lights
and Power
turn blue.
  • Blue: the Wi-Fi Booster is turned on.
  • Purple: the Wi-Fi Booster is starting up.
  • Blinking white: Connecting to the internal network. This may take a few minutes.
  • Flashing orange: The Wi-Fi Booster has started up but is not yet configured.
  • Blue: the Wi-Fi Booster’s Wi-Fi is working correctly.

  • Blinking white: WPS pairing is in progress.

  • Red: The Wi-Fi Booster’s Wi-Fi is not working. Please restart the device.

  • Off: Wi-Fi is not configured.

  • Green: optimal signal.

  • Orange: acceptable signal.

  • Red: signal too weak. You will need to move the device or use a second one to boost the signal.


Was this guide helpful?

Thank you for your feedback!

Do you have any suggestions for us? What did you like?

We are sorry to hear that!
Your feedback matters to us!

What are you looking for?

Your feedback has been sent to our teams.