Skip to main content
Menu
View all guides

V5 Compact TV Box

Installation Guide
Step 1

Before you begin

My TV Box
Select the type of TV Box you want to install.
Please ensure you have at least one b-box 3 or Internet Box installed.
My b-box / Internet Box

Required components for the installation


Step 2

Connect the TV Box to the Internet Box

Use the Ethernet cable and connect it to one of the yellow LAN ports on the back of the Internet Box.
Don’t want to trip over cables, or are your Internet Box and TV Box too far apart? Don’t panic – discover the Wi-Fi Booster!
If you’d like to connect an extra TV to Pickx, you’ll need a second TV Box. Check first whether this is possible in your home!

Step 3

Switch on the TV Box

Connect the power cable to your TV Box and to a power socket.
The solution is to switch it off and on again using the switch on the back of the TV Box. This will restart it.

Step 4

Check the indicator lights on the Internet Box

The indicator lights on the front should turn blue and remain solid.

Step 5

Connecting the TV Box to the TV

You’re almost there! Now connect your TV Box to your TV using the HDMI cable for the best picture quality.
In this case, use a SCART cable. Connect the round end of the cable to the SCART port on the TV Box and the flat plug to the back of your TV.
There are three options available to you, depending on the connections available on your audio device Please refer to your audio system’s manual for further information.

Step 6

Configure the TV Box

Turn on your TV; the start-up screen will appear. If this does not happen, use your TV’s remote control to select the external source to which your TV Box is connected (HDMI1, HDMI2, HDMI3, etc.).
Next, take the Proximus remote control, remove the protective tab from the batteries and enter the details shown on the screen.
These arrow keys allow you to navigate through the menu.
To confirm your choice.

Select the language

Enter your line number

This is the telephone number or identification number shown in the confirmation letter you received when your TV subscription was activated. If you have Fiber, it is the 9-digit TV reference number.

Enter the PIN code

The parental PIN code is set to 1234 by default, unless you have already changed it.
Did you enter the wrong PIN code? Use the arrow keys to navigate and re-enter the correct PIN code. Forgotten your PIN code? Call 0800 99 696 free of charge.

Pickx screen

Configuration time: 15 minutes maximum

Was this guide helpful?

Thank you for your feedback!

Do you have any suggestions for us? What did you like?

We are sorry to hear that!
Your feedback matters to us!

What are you looking for?

Your feedback has been sent to our teams.