View all guides
TV Box Android Wi-Fi
Installation GuideBefore you begin
Please make sure you have a b-box / Internet Box installed.
If you are replacing a TV Box
- Call 0800 99 696 free of charge and follow the instructions. Please make sure you have a Proximus payment statement or letter to hand, showing your customer number and line number.
- Please make sure you use the new remote control and all the cables provided.
- If a technician replaces your TV Box, they will, of course, bring the necessary equipment with them.
Required components for the installation
- The TV Box Android Wi-Fi (4K Ultra HD/HDR)
- The remote control and its batteries
- The power supply cable
- The Ethernet cable
- The HDMI cable
Switch on the TV Box
Connect the power supply cable to your TV Box and to a power socket.
-
The solution is to switch it off and on again using the switch at the back of the TV Box. This will restart it.
Connecting the TV Box to the TV
We’re almost done! Now connect your TV Box to your TV using the HDMI cable.
-
There are two options available to you, depending on the connections available on your audio device Please refer to your audio system’s manual for further information.
Configure the TV Box
Turn on your TV; the start-up screen will appear.
If this does not happen, use your TV’s remote control to select the external source to which your TV Box is connected (HDMI1, HDMI2, HDMI3, etc.).
Then take the Proximus remote control, remove the protective tab from the batteries and enter the details shown on the screen.
If this does not happen, use your TV’s remote control to select the external source to which your TV Box is connected (HDMI1, HDMI2, HDMI3, etc.).
Then take the Proximus remote control, remove the protective tab from the batteries and enter the details shown on the screen.
These arrow keys allow you to navigate through the menu.
To confirm your choice.
This remote control only works with this TV Box.
Below is an overview of the main configuration screens. During installation, you will be asked to carry out further configuration steps, such as setting up Bluetooth. Simply follow the on-screen instructions.
Below is an overview of the main configuration screens. During installation, you will be asked to carry out further configuration steps, such as setting up Bluetooth. Simply follow the on-screen instructions.
Select your language
Activate the remote control for your TV Box
This will also allow you to control your TV.Turn on your TV or turn it off
Select an external source on your TV
Adjusting the volume on your TV
Mute your TV
Configure your TV Box using your smartphone
Do you have an Android smartphone? Log in to your Wi-Fi network to configure the TV Box by pressing ‘Continue’. If not, press ‘Skip’.
Would you rather connect your TV Box to Wi-Fi without a smartphone? Select your Wi-Fi network and enter the Wi-Fi password for your Internet Box.
The Google screens
A series of screens will appear to help you configure Google services (terms and conditions, Google services, Google Assistant, your TV Box name, etc.).If you skip one or more of these screens, it will not affect your Pickx experience. You can return to them later via

Enter your line number
This is the telephone number or identification number shown in the confirmation letter you received when your TV subscription was activated.
Enter the PIN code
The parental PIN code is set to 1234 by default, unless you have already changed it.Did you enter the wrong PIN code? Use the arrow keys to navigate and re-enter the correct code.
Forgotten your PIN code? Call 0800 99 696 free of charge.
Pickx screen
A series of screens for configuring Pickx will appear, including one to check the stability of your Wi-Fi.
If the Wi-Fi signal is too weak, you can follow the tips to improve it. For example, if your TV Box and your Internet Box are too far apart, connect them using an Ethernet cable or a Wi-Fi Booster.
If the Wi-Fi signal is too weak, you can follow the tips to improve it. For example, if your TV Box and your Internet Box are too far apart, connect them using an Ethernet cable or a Wi-Fi Booster.
-
If you’d like to connect an extra TV to Pickx, you’ll need a second TV Box. Check first whether this is possible in your home!
Configuration may take a few minutes.
There you go – your TV Box is now configured!
Other useful guides