Skip to main content
Menu
View all guides

TV Box Android Wi-Fi 7

Installation Guide
Step 1

Before you begin

My TV Box
Select the type of TV Box you want to install.
Please make sure you have a b-box / Internet Box installed.
My b-box / Internet Box
Installation type

Required components for the installation


Step 2

Switch on the TV Box

Connect the power cable to your TV Box and to a power socket.
The solution is to switch it off and on again using the switch on the back of the TV Box. This will restart it.

Step 3

Connecting the TV Box to the TV

We’re almost done! Now connect your TV Box to your TV using the HDMI cable.
Connect them using an HDMI cable to an HDMI input on your TV. Please refer to your audio system’s manual for further information.

Step 4

Configure the TV Box

Turn on your TV; the start-up screen will appear.

If this does not happen, use your TV’s remote control to select the external source to which your TV Box is connected (HDMI1, HDMI2, HDMI3, etc.).

Then take the Proximus remote control, remove the protective tab from the batteries and enter the details shown on the screen.
These arrow keys allow you to navigate through the menu.
To confirm your choice.
This remote control only works with this TV Box.

Below is an overview of the main configuration screens. During installation, you will be asked to carry out further configuration steps, such as setting up Bluetooth. Simply follow the on-screen instructions.

Select your language

Activate the remote control for your TV Box

This will also allow you to control your TV.
Turn on your TV or turn it off
Select an external source on your TV
Adjust the volume on your TV
Mute your TV

Configure your TV Box using your smartphone

Do you have an Android smartphone? Connect it to your Wi-Fi network to configure the TV Box by pressing ‘Continue’. If not, press ‘Skip’.
Would you rather connect your TV Box to Wi-Fi without a smartphone? Select your Wi-Fi network and enter the Wi-Fi password for your Internet Box.

The Google screens

A series of screens will appear to help you configure Google services (terms and conditions, Google services, Google Assistant, your TV Box name, etc.).

If you skip one or more screens, this will not affect your Pickx experience. You can return to them later via
→ Apps →
Google Play

The Pickx screen

A series of screens for configuring Pickx will appear, including one to check the stability of your Wi-Fi.

If the Wi-Fi signal is too weak, you can follow the tips to improve it. For example, if your TV Box and your Internet Box are too far apart, connect them using an Ethernet cable or a Wi-Fi Booster.
If you’d like to connect an extra TV to Pickx, you’ll need a second TV Box. Check first whether this is possible in your home!
Configuration may take a few minutes.

Was this guide helpful?

Thank you for your feedback!

Do you have any suggestions for us? What did you like?

We are sorry to hear that!
Your feedback matters to us!

What are you looking for?

Your feedback has been sent to our teams.